Led Drivers convert the input 120V AC current to safe, energy-efficient 12V DC output to power your low voltage lights.  They are sized by watts and are available in 10W, 25W, 30W, 40W, 60W and 75W configurations.  Some units surface mount and some are installed inside a standard electrical junction box.  All of our drivers are constant voltage and carry the proper certification seal showing they meet current Canadian electrical standards. You choose the size driver needed for your project by adding up the total of the watts used by the bulbs or fixtures.  The driver wattage should not exceed the total watts of the lights you are using.  Using a driver that was designed specifically for LED lighting will help assure that you get the maximum life from your low voltage lights.

If you prefer to dim your lights from a standard 2x3 wall box we have dimmable LED magnetic transformers that will work with a low voltage magnetic dimmer.  Use a dimmable driver and replace your wall switch with one of the approved dimmers.  There is a link below to a PDF file with the dimmer compatibility list.

If you have a special application that requires a smaller or larger driver we will be glad to special order a driver that will meet your requirements.