12V Key Chain Remote Dimmer

This RF (radio frequency) LED dimmer comes with a key chain remote that will dim and control our kitchen task lights, cabinet puck lights and our single colour Snap n Flex LED flex strips.  It can be used for 12V or 24V systems and requires no additional wiring to use.  Simply connect the output from the driver to the input of the dimming module and the output of the module to your lights. The handy key chain remote has 3 buttons that control on / off, brighter and dimmer modes.  Connections are made using fast and easy spring-loaded terminals.  One dimmer will handle up to 96 watts at 12 volts.  Output frequency is approximately 4300 Hz.  The remote will control the lights from up to 30 feet with no line of sight required.  If you already have your LED lights installed you can easily add dimming to your lights without any additional wiring.  Because the dimmer uses RF it can be put inside a cabinet and be mounted next to the driver.

Part # LLC KCDIMM

Specs:

Input Voltage:  12 - 24 Volts
Max Load:  8 Amps
Output: Single Channel
Output Power:  12V- 96 watts, 24V- 196 watts
Receiver Size:  (L) 110 x (W) 56 x (H) 34mm
Net Weight:  100g
Function:  Dims from 0 ~ 100 using PWM (pulse width modulation)

Remote

3 button:  on / off, brightness up, brightness down
Sturdy key chain clip attached to remote control