0-10V Touchless Sensor

With the wave of your hand this 0-10V low voltage proximity sensor will turn your low voltage lights on and off and also dim them.  This is a touchless control that will activate when it senses your hand and does not require you to touch the sensor or the wall plate.

The sensor can be mounted inside a cabinet so a wave of your hand will activate the lights and holding your hand over the cabinet your lights will dim. The sensor will work through material up to 3/4" thick.  This sensor fits into a standard 2X4 electrical box and is connected to the HHG DMS-500X dimming module.  The entire system is all low voltage and is safe and easy to install.  You can cover the sensor with a standard blank plate or for a more finished look our customized Lutron Claro screwless wall plate is available.

Part #SEM-0001-D

Specs:

Supply Voltage:  12-30 V DC
No Load Current: 6 mA

Max Voltage: 48V DC/AC
Output Signal:
Max. Current 1 mA, 0-10V, 0V=off

Dimensions:  1.85" x 4.2" x 0.55"
**Adjustable Sensing Range: 0" - 2" 
(**Measured with human hand as a target and without medium in front of the sensor.
Actual results may vary depending on medium and target size and material.)

Simple Wiring Instructions for Touchless 12V Dimming kit & Universal PWM Dimmer

Our Capacitive proximity sensors are designed to cover a variety of applications such as input devices for lighting, door activation, door locks and latches, door bells. motorized window shades and blinds, sunroofs, projection screens, security systems. For additional information please visit the Anigmo web site or call us at 1-800-677-2698 .